If you’ve ever had a Sega Dreamcast, you know how awesome of a console it was. I love the dreamcast, but I got rid of the TV in my bedroom. Crap. What was I ever to do? Why, hack it open of course! Oh, sure, I could just as easily go out and buy Sega’s "VGA box" for about $30 This mod will tell you how (assuming you have some decent soldering skills) to add a vga port to the back of your Dreamcast, for considerably less than the cost of a commercial VGA box which does the exact same thing. No IC’s are involved here, just regular components, like capacitors, resistors and diodes. I plugged my Dreamcast into my LCD monitor, and it works like a charm.

Tools Needed:
No. 2 Phillips screwdriver
Wire cutters/strippers
Soldering iron
Dremel + steel burr

Materials Needed:
3x 220uF capacitors
2x Silicon diodes
2x 4.7Kohm resistors
2x 150ohm resistors
1x Slide or toggle switch
1x Female VGA port
1x 3.5mm stereo audio jack
Solder
Electrical tape

By: mothflavour2

More: continued here